Dynamic Regrouping Feature

A zone and its channel that are defined to be a designated Regrouping Zone and Channel mode, must be able to be "mechanically" accessed in order for radio-user navigation from the regrouped channel.

For instance:

• Once your radio is Dynamically Regrouped, the radio-user must "mechanically" change the radio to the regrouped zone and channel (with a Switch or Channel Selector) in order to be able to navigate from the regrouped channel to another channel.

• If the Zone and Channel are only assigned to "non-mechanical" positions (such as Side Buttons and Menu Buttons), access to the regrouped channel, and therefore the ability to navigate from the regrouped channel to another channel, will not be possible.

1. Only one Dynamic Regrouping channel may be created for each Trunking System. Dynamic Regrouping is initiated by a dispatcher / console operator, or requested by the radio user.

2. The radio-user may request a Dynamic Regrouping assignment from the dispatcher with a Reprogram Request button-press or a Reprogram Request menu-selection.

3. When a radio is dynamically regrouped, the radio automatically switches to the Trunking System's Dynamic Regrouping Zone / Dynamic Regrouping Channel.

4. The actual 'Talkgroup" parameters are transmitted by the dispatcher to all applicable radios.

At the moment the radio is regrouped, a "gurgle" alert tone is sounded, and the regrouped channel name appears in the radio's display.

5. When the dispatcher cancels Dynamic Regrouping, the radio automatically returns to the zone and channel that were being used before the radio was dynamically regrouped.